Maintenance For Ceiling fan

Maintenance For Ceiling fan and Wall Mount Fan

To make sure your ceiling or wall-mounted fan running smoothly. It a must have the regular maintenance. More on Lighting tips….  Clean the fan blades is a basic The fan must be clean at least once a bi-monthly. For Wall mounted fan, remember to remove and clean both the front grille if you are cleaning a wall-mounted fan.

Wall mounted fan, remember to remove and clean both the front grille

For removing thin layers of dust by cleaning the fan blades. You can use a vacuum cleaner and brush attachment.

 

Sometimes you find thicker layers of dust laying on the blades. Just wipe the top and bottom part of all fan blade with a damp cloth. Try to avoid shaking or bending the fan blades excessively this will to prevent damaging the blades.

Thicker layers of dust Just wipe the top and bottom part of all fan blade with a damp cloth

Please do not use bleach-based cleaners and any harsh chemical to clean the fan blade, Because this may wear or damage its smooth surface finish. Thus cause the blade warping.

Peroridicaly tightening all loosen screws that cause by vibration. The result of Loosen screws can cause noise or unbalance fan. You can tighten all visible screws with a screwdriver, particularly those on the fan, ceiling plate, and light fixture.

Peroridicaly tightening all loosen screws that cause by vibration.

Fan with low-humming or intermittent noise emitted from the ceiling or wall-mounted fans. The sound can cause a nuisance to your neighbours. For Humming Noise the first step, you can try to resolve the humming noise by lubricating the fan motor bearing with light machine oil. (do not use WD 40) it, not recommended machine oil.

Other Interesting Topic

Even you lubricated the fan bearing. You can Book an Appointment with us

Welcome to One of the Top Ceiling Fan installation and repair. We provide almost all type of ceiling fan repair. We have Ceiling fan installation Singapore islandwide service as well as Ceiling fan repair Singapore. Therefore “How much to repair a ceiling fan?” Typically Ceiling fan repair Singapore usually will cost around $90-$150 or more depending on the nature of the work. We have OME Fan repair kit for Elmark ceiling fan repair Kit, KDK fan repair Kit and Fanco fan repair Kit.

Electrician Services

License Electrician Singapore wears white colour shirt Performing an Electrical Insulation test on new wiring Installation

Send Us WhatsApp message!

HOTLINE: 9660 9742

Service pledge

Our Service goes beyond electrical work. Therefore our people, it’s a passion and care for the society to create electrical save the environment. It means we treat our customer like our self. We do our work with precision and the highest level of safety. In conclusion, we leave sites safer than when we first arrived. Always showing up on time and fix it right the first time. You’re working with are true professionals.

Replacing Light Bulbs

Replacing Light Bulbs

Tips for you to replace light bulbs at home. In addition for cost-saving use energy-saving lamps or LED. It is because consume less energy higher output of light. Finally, avoid incandescent lamps at all cost. It is opposite of the energy saving. Compare to LED. Incandescent can convert only 10% of its power into usable light. Halogen lights consume relatively more energy.

Removing a light bulb
Start by Turning off the power supply to the bulb. Allow the bulb to cool down before work. Now use your hand to hold the bulb lightly and with a firm grip. Start twist the bulb in a counter-clockwise direction. You can feel it start to release from the socket.

Installing a light bulb
Before Insert a replacement bulb. Check the socket for any burn mark, if burn mark found on the socket. It due to an improper connection. Please call an electrician to replace the socket. If not continue to check the specification on the new bulb it must have the same voltage. Now do the same by applying light but firm grip and install the bulb into the socket. Start to twist clockwise until it is snugly fitted.

Test the Bulb.
Just turn the power back on, Safely dispose of the used bulb. Another alternatively, you also could arrange it into an appropriate recycling bin.

Other Interesting Topic

We also Provide Electrician Service

Electrician Services

License Electrician Singapore wears white colour shirt Performing an Electrical Insulation test on new wiring Installation

 

 

Sitemap

Danger in Light Bulb

The potential danger in a light bulb? 

What potential danger we might have faced in a light bulb? Not only broken glass, let dive in to know more. Some might hear of this the gas in the bulb is poisonous. Let us see what is inside. Most of the CFL know as Compact fluorescents lamp. They come in white tubular fluorescent precursors. For a bulb typically around five milligrams of mercury. What does Mercury do inside?

It gives an ability to emit light, so why mercury? Due to the fact; there is no other element can have such efficiency. Mercury is also highly toxic that harmful to the brains of both fetuses and children. Some of the countries have banned its use in applications. It found in thermometers to automotive and thermostat switches. Comparing a thermostat switch, which can found in many homes, it contains about 3,000 milligrams of mercury. That amount can fill up 600 compact fluorescents.

The problem Compact fluorescents lamp.

The problem comes when we accident breaks the Compact fluorescents lamp while changing it. Unknowingly the escapes mercury vapour can be easily inhaled. The worst parts are the fine powder. It settles into the carpet and other textiles. There is a case link to fluorescents: An article in 1987 Pediatrics written how a baby suffer from weight loss and severe rashes.

In the event of a broken lamp, it is advised get all personnel and pets to leave the contaminated room. Let the room air for 15 min. Shut down all Air con units and open the window. By doing so, it prevents the contamination from getting trap into the aircon and help clear the room from contamination. To clear up the area, wear a glove and use unwanted cardboard or hard paper to scope up the big chunk of broken pieces. Do not use broom and Vacuum cleaner as they will spread the mercury to others area. Use an unwanted damp cloth to wipe the affected area. Dispose of all the cleaning items in a sealable plastic bag or airtight container.

We have covered some importance handling light bulb. Please like and share this valuable information on Facebook and like the facebook page for more tips.

Others Interesting Topic:

We also provide electrician service.

LICENSED ELECTRICIAN SERVICE IN SINGAPORE
If you are looking for a Reliable, Professional, Affordable Licensed electrician (EMA License No: 7/055763). “This electrician’s licence can test supply installation while voltage operation does as much as 1,000 volts”…. (Read More) continue well you come to the right place we are proud of the top local Reliable electrician service and we are committed to creating the affordable, reliable and satisfying customer experience. No matter what type of electrical service or installation you need call us for a quote now

Electrician Service

License Electrician Singapore wears white colour shirt Performing an Electrical Insulation test on new wiring Installation

 

How to become an Electrician?

How to become an Electrician?

An Outage occurs due to an overloaded appliance. The electrician is restoring the power now.

So you have heard the people saying “electrician is retrenchment proof” Wanted to be an electrician.

Looking forward start a career as an electrician. Fantastic! Electricians are the pillars to keep the economy running. Now we see the value of electrician. Let get started on how to become an electrician?

An electrician that works in Singapore is now using an electrical wire stripper to remove the insulated electrical conductor.

First, we’ll provide some the basic knowledge about how people work them self up to be electricians—school and various options people can take. After that, we look at the different aspects of the job.

How Do Electricians Start?

Here is some importance requirement which helps you a sense how to start:

In Singapore, to work as an electrician is required to have a license with the EMA. For the apprentice, you can start off as an assistant of a licensed electrician. For an apprentice, you don’t need to have a license, as expected the salary is a humble start; focus on the goal of most electricians gets a licensing issue by EMA. There is three grade of electrical licenses issue by EMA find out click here.
A License Electrician from Singapore Removing an electrical circuit panel for electrical safety regulation inspection.

Minimum Requirement for Electrician

To ONLY qualify for the EMA test application, there are two minimum requirement from EMA;

1) he who holds a National Institute of Technical Education Certificate has curriculum is relevant to the electrical work. Also, he must be an electrician is authorised to perform or such other qualifications as may be acceptable to the Authority. Furthermore, he must have two years’ practical experience in Singapore for relevant to the electrical work. In which an electrician is authorised to perform electrician must complete an apprenticeship.

2) minimum ten years’ practical experience in Singapore relevant to the electrical work which an electrician is authorised to perform.

Ways to get an Electrician Apprenticeship.

1) find work that has an entry-level job, meet up and mix around with electrical professional get some connections. Go to ITE and visit government job fair like Events – SSG/WSG. A lot of apprenticeships started through there.

Top License Electrician Singapore Leather Tools belt

2) Seek apprenticeship opportunities by calling the contact employers or unions directly and ask if do they offer electrician apprenticeship opportunities. Most of the employer don’t offer but don’t give up that easy. There still company employ the apprentice.

What Electrician learn in school? (Basic)

Licence electrician was currently performing a test on a supply installation that has a voltage operation or 400 volts and below.

ITE is a recognised Trade school for an electrician. It correctly set up for you start off in a career as an electrician. You learn the very basic from the beginning and build on your knowledge grow. It’s important to study why? It is because all electrical works and wonder are builds on the theory and principle of physics. Therefore, it becomes critical to have proper skill and knowledge that build on it. ITE provides Instructors guild and teach students on practice skill and even conduct laboratory test to show how thing work. This help strengthens the knowledge of the student.

Continue How to become an Electrician?

ITE is a good trade school. It can be an excellent way to get ready for your journey. Keep this in mind. Not all electrician is going to the trade school. There are others doing good without going to school even got their license. But words of advice the theory and principle is essential to you and make your journey FUN and open new perspective too.

LICENSED ELECTRICIAN SERVICE IN SINGAPORE

License Electrician Singapore wears white colour shirt Performing an Electrical Insulation test on new wiring InstallationIf you are looking for a Reliable, Professional, Affordable Licensed electrician (EMA License No: 7/055763). “This electrician’s licence can test supply installation while voltage operation does as much as 1,000 volts”…. (Read More) continue well you come to the right place we are proud of the top local Reliable electrician service and we are committed to creating the affordable, reliable and satisfying customer experience. No matter what type of electrical service or installation you need call us for a quote now

Electrician Services

HOMEPAGE

Site Map

DIY When Wrong

This just one of our customer story “DIY GONE WRONG” His name is Mr Low. We have also sought his permission to share his story. He hopes that we can use his account let people aware of this. On Sep 2017 Mr Low’s wife keeps grumbling about him for two weeks on a broken electrical socket. Finally, he found some time on a Saturday afternoon to replace the faulty Socket. He searches on the internet and manages to find some “DIY tips”.

The owner is attempting to a DIY tip. He follows the electrical topic on the web after reading.

He hurried to the nearby hardware shop to purchase an electrical socket. Mr Low bought a packet of chicken rice with a drumstick to reward himself for DIY. His wife saw him coming back with the electrical socket got worried. Mrs Low asked: “since when you know electrical work”. He replied: “I learn it 20 min ago from the net, It simply remove and put back“. Like what written on the internet. Everytime you also learn cooking from youtube. His wife reminded him you to off the main switch before replacing doing the work. After 20 min Mr Low manages to replace his socket. He was delighted to switch on and test his work. It was the first time and the last time flip the main circuit breaker again. Boom he got a shock of his life. Mr Low: “is sound like an explosion”.His wife running out of the bedroom asking what happen? He replies I don’t know.

The man switch of the electrical circuit breaker before he replace the electrical socket

Mr Low contacted us for emergency help. Our electrician Thomas reaches Mr Low house in a short time frame. Thomas restores the power and replaces all the faulty parts. Explain to Mr Low that he has done a wrong wiring. The colour code is different from the internet result he searches. The total repair cost more than the original repair. Mr Low was very grateful that we help him to solve his problem and he didn’t get someone injured. Mrs low joking said “See la you don’t now don’t do now pay so much more, lucky you never die”

An electrician found the electrical wiring done by the owner is wrong. Therefore it causes direct shock. As a result, the main circuit breaker is damage.

Mr Low is not the first customer try DIY and fail. The number of cases has increased recently since 2014. A lot homeowner wanted to save money by attempting to do DIY. The Internet also has become more advanced and informative in the recent year. People tend to look into youtube video on how to topic. It perfectly fine watches some video and does the cooking. But on the engineering or health care factor, the information is not sufficient enough. Some importance objective of the DIY topics or video wants up to drive up the internet traffic. Example of health care and engineering this requires more than some work experience and skill. The DIY topic like cooking and some ART and craft bring fun and interaction for the family. On engineering and health content this topic this requires more than 10 min youtube video.

 

License Electrician Singapore wears white colour shirt Performing an Electrical Insulation test on new wiring Installation

It is better to call up a company with License electrician than watching a youtube video. Our company have (EMA License No: 7/055763) electrician service Island-wide at an affordable rate. Our electrician is well trained with good experience in most electrical repair like new or old wiring installation, ceiling fan, and LED lighting repair or installation. We also do ad-hod electrical minor repair changing of electrical

Electrician Service

Send Us WhatsApp message!

Hot Line: 9660 9742

Service pledge

Our Service goes beyond electrical work. Therefore our people, it’s a passion and care for the society to create electrical save the environment. It means we treat our customer like our self. We do our work with precision and the highest level of safety. In conclusion, we leave sites safer than when we first arrived. Always showing up on time and fix it right the first time. You’re working with are true professionals.

LET CREATE AN ELECTRICAL SAFE ENVIRONMENT